39

Entropy

Entropy (*S*) is a state function that can be related to the number of microstates for a system (the number of ways the system can be arranged) and to the ratio of reversible heat to kelvin temperature. It may be interpreted as a measure of the dispersal or distribution of matter and/or energy in a system, and it is often described as representing the “disorder” of the system. For a given substance, entropy depends on phase with *S*solid < *S*liquid < *S*gas. For different substances in the same physical state at a given temperature, entropy is typically greater for heavier atoms or more complex molecules. Entropy increases when a system is heated and when solutions form. Using these guidelines, the sign of entropy changes for some chemical reactions and physical changes may be reliably predicted. The second law of thermodynamics states that a spontaneous process increases the entropy of the universe, *S*univ > 0. If Δ*S*univ < 0, the process is nonspontaneous, and if Δ*S*univ = 0, the system is at equilibrium. The third law of thermodynamics establishes the zero for entropy as that of a perfect, pure crystalline solid at 0 K. With only one possible microstate, the entropy is zero. We may compute the standard entropy change for a process by using standard entropy values for the reactants and products involved in the process.

By the end of this section, you will be able to:

- Define entropy
- Explain the relationship between entropy and the number of microstates
- Predict the sign of the entropy change for chemical and physical processes

In 1824, at the age of 28, Nicolas Léonard Sadi Carnot (Figure 39.1) published the results of an extensive study regarding the efficiency of steam heat engines. A later review of Carnot’s findings by Rudolf Clausius introduced a new thermodynamic property that relates the spontaneous heat flow accompanying a process to the temperature at which the process takes place. This new property was expressed as the ratio of the *reversible* heat (*q*_{rev}) and the kelvin temperature (*T*). In thermodynamics, a reversible process is one that takes place at such a slow rate that it is always at equilibrium and its direction can be changed (it can be “reversed”) by an infinitesimally small change in some condition. Note that the idea of a reversible process is a formalism required to support the development of various thermodynamic concepts; no real processes are truly reversible, rather they are classified as *irreversible*.

Similar to other thermodynamic properties, this new quantity is a state function, so its change depends only upon the initial and final states of a system. In 1865, Clausius named this property entropy (*S*) and defined its change for any process as the following:

$$\text{\Delta}S=\phantom{\rule{0.2em}{0ex}}\frac{{q}_{\text{rev}}}{T}$$

The entropy change for a real, irreversible process is then equal to that for the theoretical reversible process that involves the same initial and final states.

Following the work of Carnot and Clausius, Ludwig Boltzmann developed a molecular-scale statistical model that related the entropy of a system to the *number of microstates* (*W*) possible for the system. A microstate is a specific configuration of all the locations and energies of the atoms or molecules that make up a system. The relation between a system’s entropy and the number of possible microstates is

$$S=k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.2em}{0ex}}W$$

where *k* is the Boltzmann constant, 1.38 $\times $ 10^{−23} J/K.

As for other state functions, the change in entropy for a process is the difference between its final (*S*_{f}) and initial (*S*_{i}) values:

$$\text{\Delta}S={S}_{\text{f}}-{S}_{\text{i}}=k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.2em}{0ex}}{W}_{\text{f}}-k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.2em}{0ex}}{W}_{\text{i}}=k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.2em}{0ex}}\frac{{W}_{\text{f}}}{{W}_{\text{i}}}$$

For processes involving an increase in the number of microstates, *W*_{f} > *W*_{i}, the entropy of the system increases and Δ*S* > 0. Conversely, processes that reduce the number of microstates, *W*_{f} < *W*_{i}, yield a decrease in system entropy, Δ*S* < 0. This molecular-scale interpretation of entropy provides a link to the probability that a process will occur as illustrated in the next paragraphs.

Consider the general case of a system comprised of *N* particles distributed among *n* boxes. The number of microstates possible for such a system is *n ^{N}*. For example, distributing four particles among two boxes will result in 2

For this system, the most probable configuration is one of the six microstates associated with distribution (c) where the particles are evenly distributed between the boxes, that is, a configuration of two particles in each box. The probability of finding the system in this configuration is $\frac{6}{16}$ or $\frac{3}{8}.$ The least probable configuration of the system is one in which all four particles are in one box, corresponding to distributions (a) and (e), each with a probability of $\frac{1}{16}.$ The probability of finding all particles in only one box (either the left box or right box) is then $\left(\frac{1}{16}\phantom{\rule{0.2em}{0ex}}+\phantom{\rule{0.2em}{0ex}}\frac{1}{16}\right)\phantom{\rule{0.2em}{0ex}}=\phantom{\rule{0.2em}{0ex}}\frac{2}{16}$ or $\frac{1}{8}.$

As you add more particles to the system, the number of possible microstates increases exponentially (2^{N}). A macroscopic (laboratory-sized) system would typically consist of moles of particles (*N* ~ 10^{23}), and the corresponding number of microstates would be staggeringly huge. Regardless of the number of particles in the system, however, the distributions in which roughly equal numbers of particles are found in each box are always the most probable configurations.

This matter dispersal model of entropy is often described qualitatively in terms of the *disorder* of the system. By this description, microstates in which all the particles are in a single box are the most ordered, thus possessing the least entropy. Microstates in which the particles are more evenly distributed among the boxes are more disordered, possessing greater entropy.

The previous description of an ideal gas expanding into a vacuum (Figure 39.3) is a macroscopic example of this particle-in-a-box model. For this system, the most probable distribution is confirmed to be the one in which the matter is most uniformly dispersed or distributed between the two flasks. Initially, the gas molecules are confined to just one of the two flasks. Opening the valve between the flasks increases the volume available to the gas molecules and, correspondingly, the number of microstates possible for the system. Since *W*_{f} > *W*_{i}, the expansion process involves an increase in entropy (Δ*S* > 0) and is spontaneous.

A similar approach may be used to describe the spontaneous flow of heat. Consider a system consisting of two objects, each containing two particles, and two units of thermal energy (represented as “*”) in Figure 39.4. The hot object is comprised of particles **A** and **B** and initially contains both energy units. The cold object is comprised of particles **C** and **D**, which initially has no energy units. Distribution (a) shows the three microstates possible for the initial state of the system, with both units of energy contained within the hot object. If one of the two energy units is transferred, the result is distribution (b) consisting of four microstates. If both energy units are transferred, the result is distribution (c) consisting of three microstates. Thus, we may describe this system by a total of ten microstates. The probability that the heat does not flow when the two objects are brought into contact, that is, that the system remains in distribution (a), is $\frac{3}{10}.$ More likely is the flow of heat to yield one of the other two distribution, the combined probability being $\frac{7}{10}.$ The most likely result is the flow of heat to yield the uniform dispersal of energy represented by distribution (b), the probability of this configuration being $\frac{4}{10}.$ This supports the common observation that placing hot and cold objects in contact results in spontaneous heat flow that ultimately equalizes the objects’ temperatures. And, again, this spontaneous process is also characterized by an increase in system entropy.

The initial number of microstates is one, the final six:

$$\text{\Delta}S=k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.2em}{0ex}}\frac{{W}_{\text{c}}}{{W}_{\text{a}}}\phantom{\rule{0.2em}{0ex}}=1.38\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}{10}^{\mathrm{-23}}\phantom{\rule{0.2em}{0ex}}\text{J/K}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.4em}{0ex}}\frac{6}{1}\phantom{\rule{0.2em}{0ex}}=2.47\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}{10}^{\mathrm{-23}}\phantom{\rule{0.2em}{0ex}}\text{J/K}$$

The sign of this result is consistent with expectation; since there are more microstates possible for the final state than for the initial state, the change in entropy should be positive.

0 J/K

The relationships between entropy, microstates, and matter/energy dispersal described previously allow us to make generalizations regarding the relative entropies of substances and to predict the sign of entropy changes for chemical and physical processes. Consider the phase changes illustrated in Figure 39.5. In the solid phase, the atoms or molecules are restricted to nearly fixed positions with respect to each other and are capable of only modest oscillations about these positions. With essentially fixed locations for the system’s component particles, the number of microstates is relatively small. In the liquid phase, the atoms or molecules are free to move over and around each other, though they remain in relatively close proximity to one another. This increased freedom of motion results in a greater variation in possible particle locations, so the number of microstates is correspondingly greater than for the solid. As a result, *S*_{liquid} > *S*_{solid} and the process of converting a substance from solid to liquid (melting) is characterized by an increase in entropy, Δ*S* > 0. By the same logic, the reciprocal process (freezing) exhibits a decrease in entropy, Δ*S* < 0.

Now consider the gaseous phase, in which a given number of atoms or molecules occupy a *much* greater volume than in the liquid phase. Each atom or molecule can be found in many more locations, corresponding to a much greater number of microstates. Consequently, for any substance, *S*_{gas} > *S*_{liquid} > *S*_{solid}, and the processes of vaporization and sublimation likewise involve increases in entropy, Δ*S* > 0. Likewise, the reciprocal phase transitions, condensation and deposition, involve decreases in entropy, Δ*S* < 0.

According to kinetic-molecular theory, the temperature of a substance is proportional to the average kinetic energy of its particles. Raising the temperature of a substance will result in more extensive vibrations of the particles in solids and more rapid translations of the particles in liquids and gases. At higher temperatures, the distribution of kinetic energies among the atoms or molecules of the substance is also broader (more dispersed) than at lower temperatures. Thus, the entropy for any substance increases with temperature (Figure 39.6).

This interactive tutorial will help you to visualize the dependence of particle location and freedom of motion on physical state and temperature.

The entropy of a substance is influenced by the structure of the particles (atoms or molecules) that comprise the substance. With regard to atomic substances, heavier atoms possess greater entropy at a given temperature than lighter atoms, which is a consequence of the relation between a particle’s mass and the spacing of quantized translational energy levels (a topic beyond the scope of this text). For molecules, greater numbers of atoms increase the number of ways in which the molecules can vibrate and thus the number of possible microstates and the entropy of the system.

Finally, variations in the types of particles affects the entropy of a system. Compared to a pure substance, in which all particles are identical, the entropy of a mixture of two or more different particle types is greater. This is because of the additional orientations and interactions that are possible in a system comprised of nonidentical components. For example, when a solid dissolves in a liquid, the particles of the solid experience both a greater freedom of motion and additional interactions with the solvent particles. This corresponds to a more uniform dispersal of matter and energy and a greater number of microstates. The process of dissolution therefore involves an increase in entropy, Δ*S* > 0.

Considering the various factors that affect entropy allows us to make informed predictions of the sign of Δ*S* for various chemical and physical processes as illustrated in Example 39.2.

(a) One mole liquid water at room temperature $\u27f6$ one mole liquid water at 50 °C

(b) ${\text{Ag}}^{\text{+}}(aq)+{\text{Cl}}^{\text{\u2212}}(aq)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}\text{AgCl}(s)$

(c) ${\text{C}}_{6}{\text{H}}_{6}(l)+\frac{15}{2}{\text{O}}_{2}(g)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}6{\text{CO}}_{2}(g)+3{\text{H}}_{2}\text{O}(l)$

(d) ${\text{NH}}_{3}(s)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}{\text{NH}}_{\text{3}}(l)$

(b) negative, reduction in the number of ions (particles) in solution, decreased dispersal of matter

(c) negative, net decrease in the amount of gaseous species

(d) positive, phase transition from solid to liquid, net increase in dispersal of matter

(a) ${\text{NaNO}}_{3}(s)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}{\text{Na}}^{\text{+}}(aq)+{\text{NO}}_{3}{}^{\text{\u2212}}(aq)$

(b) the freezing of liquid water

(c) ${\text{CO}}_{2}(s)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}{\text{CO}}_{2}(g)$

(d) ${\text{CaCO}}_{3}(s)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}\text{CaO}(s)+{\text{CO}}_{2}(g)$

(a) Positive; The solid dissolves to give an increase of mobile ions in solution. (b) Negative; The liquid becomes a more ordered solid. (c) Positive; The relatively ordered solid becomes a gas. (d) Positive; There is a net increase in the amount of gaseous species.

Supplemental exercises are available if you would like more practice with these concepts.

By the end of this section, you will be able to:

- State and explain the second and third laws of thermodynamics
- Calculate entropy changes for phase transitions and chemical reactions under standard conditions

In the quest to identify a property that may reliably predict the spontaneity of a process, a promising candidate has been identified: entropy. Processes that involve an increase in entropy *of the system* (Δ*S* > 0) are very often spontaneous; however, examples to the contrary are plentiful. By expanding consideration of entropy changes to include *the surroundings*, we may reach a significant conclusion regarding the relation between this property and spontaneity. In thermodynamic models, the system and surroundings comprise everything, that is, the universe, and so the following is true:

$$\text{\Delta}{S}_{\text{univ}}=\text{\Delta}{S}_{\text{sys}}+\text{\Delta}{S}_{\text{surr}}$$

To illustrate this relation, consider again the process of heat flow between two objects, one identified as the system and the other as the surroundings. There are three possibilities for such a process:

- The objects are at different temperatures, and heat flows from the hotter to the cooler object.
*This is always observed to occur spontaneously.*Designating the hotter object as the system and invoking the definition of entropy yields the following:The magnitudes of −$$\text{\Delta}{S}_{\text{sys}}=\phantom{\rule{0.2em}{0ex}}\frac{\text{\u2212}{q}_{\text{rev}}}{{T}_{\text{sys}}}\phantom{\rule{2em}{0ex}}\text{and}\phantom{\rule{2em}{0ex}}\text{\Delta}{S}_{\text{surr}}=\phantom{\rule{0.2em}{0ex}}\frac{{q}_{\text{rev}}}{{T}_{\text{surr}}}$$*q*_{rev}and*q*_{rev}are equal, their opposite arithmetic signs denoting loss of heat by the system and gain of heat by the surroundings. Since*T*_{sys}>*T*_{surr}in this scenario, the entropy*decrease*of the system will be less than the entropy*increase*of the surroundings, and so*the entropy of the universe will increase*:$$\begin{array}{l}\left|\text{\Delta}{S}_{\text{sys}}\right|<\left|\text{\Delta}{S}_{\text{surr}}\right|\\ \text{\Delta}{S}_{\text{univ}}=\text{\Delta}{S}_{\text{sys}}+\text{\Delta}{S}_{\text{surr}}>0\end{array}$$ - The objects are at different temperatures, and heat flows from the cooler to the hotter object.
*This is never observed to occur spontaneously.*Again designating the hotter object as the system and invoking the definition of entropy yields the following:The arithmetic signs of$$\text{\Delta}{S}_{\text{sys}}=\phantom{\rule{0.2em}{0ex}}\frac{{q}_{\text{rev}}}{{T}_{\text{sys}}}\phantom{\rule{2em}{0ex}}\text{and}\phantom{\rule{2em}{0ex}}\text{\Delta}{S}_{\text{surr}}=\phantom{\rule{0.2em}{0ex}}\frac{\text{\u2212}{q}_{\text{rev}}}{{T}_{\text{surr}}}$$*q*_{rev}denote the gain of heat by the system and the loss of heat by the surroundings. The magnitude of the entropy change for the surroundings will again be greater than that for the system, but in this case, the signs of the heat changes (that is,*the direction of the heat flow*) will yield a negative value for Δ*S*_{univ}.*This process involves a decrease in the entropy of the universe.* - The objects are at essentially the same temperature,
*T*_{sys}≈*T*_{surr}, and so the magnitudes of the entropy changes are essentially the same for both the system and the surroundings. In this case, the entropy change of the universe is zero, and the system is*at equilibrium*.$$\begin{array}{l}\left|\text{\Delta}{S}_{\text{sys}}\right|\approx \left|\text{\Delta}{S}_{\text{surr}}\right|\\ \text{\Delta}{S}_{\text{univ}}=\text{\Delta}{S}_{\text{sys}}+\text{\Delta}{S}_{\text{surr}}=0\end{array}$$

These results lead to a profound statement regarding the relation between entropy and spontaneity known as the second law of thermodynamics: *all spontaneous changes cause an increase in the entropy of the universe.* A summary of these three relations is provided in Table 39.1.

The Second Law of Thermodynamics

ΔS_{univ} > 0 | spontaneous |

ΔS_{univ} < 0 | nonspontaneous (spontaneous in opposite direction) |

ΔS_{univ} = 0 | at equilibrium |

For many realistic applications, the surroundings are vast in comparison to the system. In such cases, the heat gained or lost by the surroundings as a result of some process represents a very small, nearly infinitesimal, fraction of its total thermal energy. For example, combustion of a fuel in air involves transfer of heat from a system (the fuel and oxygen molecules undergoing reaction) to surroundings that are infinitely more massive (the earth’s atmosphere). As a result, *q*_{surr} is a good approximation of *q*_{rev}, and the second law may be stated as the following:

$$\text{\Delta}{S}_{\text{univ}}=\text{\Delta}{S}_{\text{sys}}+\text{\Delta}{S}_{\text{surr}}=\text{\Delta}{S}_{\text{sys}}+\frac{{q}_{\text{surr}}}{T}$$

We may use this equation to predict the spontaneity of a process as illustrated in Example 39.3.

$${\text{H}}_{2}\text{O}(s)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\text{O}(l)$$

is 22.1 J/K and requires that the surroundings transfer 6.00 kJ of heat to the system. Is the process spontaneous at −10.00 °C? Is it spontaneous at +10.00 °C?

At −10.00 °C (263.15 K), the following is true:

$$\begin{array}{cc}\hfill \text{\Delta}{S}_{\text{univ}}& =\text{\Delta}{S}_{\text{sys}}+\text{\Delta}{S}_{\text{surr}}=\text{\Delta}{S}_{\text{sys}}+\frac{{q}_{\text{surr}}}{T}\hfill \\ & =\text{22.1 J/K}+\frac{\mathrm{-6.00}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}{10}^{3}\phantom{\rule{0.2em}{0ex}}\text{J}}{\text{263.15 K}}\phantom{\rule{0.2em}{0ex}}=\mathrm{-0.7}\phantom{\rule{0.2em}{0ex}}\text{J/K}\hfill \end{array}$$

*S*_{univ} < 0, so melting is nonspontaneous (*not* spontaneous) at −10.0 °C.

At 10.00 °C (283.15 K), the following is true:

$$\begin{array}{}\\ \text{\Delta}{S}_{\text{univ}}=\text{\Delta}{S}_{\text{sys}}+\frac{{q}_{\text{surr}}}{T}\\ \\ =22.1\phantom{\rule{0.2em}{0ex}}\text{J/K}+\frac{\mathrm{-6.00}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}{10}^{3}\phantom{\rule{0.2em}{0ex}}\text{J}}{\text{283.15 K}}\phantom{\rule{0.2em}{0ex}}=\text{+0.9 J/K}\end{array}$$

*S*_{univ} > 0, so melting *is* spontaneous at 10.00 °C.

Entropy is a state function, so Δ*S*_{freezing} = −Δ*S*_{melting} = −22.1 J/K and *q*_{surr} = +6.00 kJ. At −10.00 °C spontaneous, +0.7 J/K; at +10.00 °C nonspontaneous, −0.9 J/K.

The previous section described the various contributions of matter and energy dispersal that contribute to the entropy of a system. With these contributions in mind, consider the entropy of a pure, perfectly crystalline solid possessing no kinetic energy (that is, at a temperature of absolute zero, 0 K). This system may be described by a single microstate, as its purity, perfect crystallinity and complete lack of motion means there is but one possible location for each identical atom or molecule comprising the crystal (*W* = 1). According to the Boltzmann equation, the entropy of this system is zero.

$$S=k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.2em}{0ex}}W=k\phantom{\rule{0.2em}{0ex}}\text{ln}\phantom{\rule{0.1em}{0ex}}(1)=0$$

This limiting condition for a system’s entropy represents the third law of thermodynamics: *the entropy of a pure, perfect crystalline substance at 0 K is zero.*

Careful calorimetric measurements can be made to determine the temperature dependence of a substance’s entropy and to derive absolute entropy values under specific conditions. Standard entropies (*S*°) are for one mole of substance under standard conditions (a pressure of 1 bar and a temperature of 298.15 K; see details regarding standard conditions in the thermochemistry chapter of this text). The standard entropy change (Δ*S*°) for a reaction may be computed using standard entropies as shown below:

$$\text{\Delta}S\text{\xb0}=\sum \nu S\text{\xb0}\text{(products)}\phantom{\rule{0.2em}{0ex}}-\sum \nu S\text{\xb0}\text{(reactants)}$$

where ν represents stoichiometric coefficients in the balanced equation representing the process. For example, Δ*S*° for the following reaction at room temperature

$$m\text{A}+n\text{B}\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}x\text{C}+y\text{D,}$$

is computed as:

$$=\left[xS\xb0(\text{C})+yS\text{\xb0}(\text{D})\right]\phantom{\rule{0.2em}{0ex}}-\phantom{\rule{0.2em}{0ex}}\left[mS\text{\xb0}(\text{A})+nS\text{\xb0}(\text{B})\right]$$

A partial listing of standard entropies is provided in Table 39.2, and additional values are provided in OpenStax's Appendix G. The example exercises that follow demonstrate the use of *S*° values in calculating standard entropy changes for physical and chemical processes.

Substance | $S\text{\xb0}$ (J mol^{−1} K^{−1}) |

carbon | |

C(s, graphite) | 5.740 |

C(s, diamond) | 2.38 |

CO(g) | 197.7 |

CO_{2}(g) | 213.8 |

CH_{4}(g) | 186.3 |

C_{2}H_{4}(g) | 219.5 |

C_{2}H_{6}(g) | 229.5 |

CH_{3}OH(l) | 126.8 |

C_{2}H_{5}OH(l) | 160.7 |

hydrogen | |

H_{2}(g) | 130.57 |

H(g) | 114.6 |

H_{2}O(g) | 188.71 |

H_{2}O(l) | 69.91 |

HCI(g) | 186.8 |

H_{2}S(g) | 205.7 |

oxygen | |

O_{2}(g) | 205.03 |

$${\text{H}}_{2}\text{O}(g)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}{\text{H}}_{2}\text{O}(l)$$

$$\Delta S\xb0=(1\phantom{\rule{0.2em}{0ex}}\text{mol})(70.0\phantom{\rule{0.2em}{0ex}}\text{J}\phantom{\rule{0.2em}{0ex}}{\text{mol}}^{\text{\u2212}1}\phantom{\rule{0.2em}{0ex}}{\text{K}}^{\text{\u2212}1})-(1\phantom{\rule{0.2em}{0ex}}\text{mol})(188.8\phantom{\rule{0.2em}{0ex}}\text{J}\phantom{\rule{0.2em}{0ex}}{\text{mol}}^{\text{\u2212}1}\phantom{\rule{0.2em}{0ex}}{\text{K}}^{\text{\u2212}1})=\text{\u2212}118.8\phantom{\rule{0.2em}{0ex}}\text{J/K}$$

The value for Δ*S*° is negative, as expected for this phase transition (condensation), which the previous section discussed.

$${\text{H}}_{2}(g)+{\text{C}}_{2}{\text{H}}_{4}(g)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}{\text{C}}_{2}{\text{H}}_{6}(g)$$

−120.6 J K^{–1} mol^{–1}

$$2{\text{CH}}_{3}\text{OH}(l)+3{\text{O}}_{2}(g)\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}2{\text{CO}}_{2}(g)+4{\text{H}}_{2}\text{O}(l)$$

$$\text{\Delta}S\text{\xb0}=\sum \nu S\text{\xb0}\text{(products)}\phantom{\rule{0.2em}{0ex}}-\sum \nu S\text{\xb0}\text{(reactants)}$$

$$\begin{array}{c}\left[2\phantom{\rule{0.2em}{0ex}}\text{mol}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}S\text{\xb0}\left({\text{CO}}_{2}(g)\right)\phantom{\rule{0.2em}{0ex}}+\phantom{\rule{0.2em}{0ex}}4\phantom{\rule{0.2em}{0ex}}\text{mol}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}S\text{\xb0}\left({\text{H}}_{2}\text{O}(l)\right)\right]\phantom{\rule{0.2em}{0ex}}-\phantom{\rule{0.2em}{0ex}}\left[2\phantom{\rule{0.2em}{0ex}}\text{mol}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}S\text{\xb0}\left({\text{CH}}_{3}\text{OH}(l)\right)\phantom{\rule{0.2em}{0ex}}+3\phantom{\rule{0.2em}{0ex}}\text{mol}\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}S\text{\xb0}\left({\text{O}}_{2}(g)\right)\right]\\ \\ =\mathbf{\left\{}\phantom{\rule{0.1em}{0ex}}\left[2\left(213.8\right)+4\phantom{\rule{0.2em}{0ex}}\times \phantom{\rule{0.2em}{0ex}}70.0\right]\phantom{\rule{0.2em}{0ex}}-\phantom{\rule{0.2em}{0ex}}[2\left(126.8\right)+3\left(205.03\right)]\phantom{\rule{0.2em}{0ex}}\mathbf{\right\}}=\mathrm{-161.1}\phantom{\rule{0.2em}{0ex}}\text{J/K}\end{array}$$

$$\text{Ca}{(\text{OH})}_{2}(\text{s})\phantom{\rule{0.2em}{0ex}}\u27f6\phantom{\rule{0.2em}{0ex}}\text{CaO}(s)+{\text{H}}_{2}\text{O}(l)$$

24.7 J/K

Supplemental exercises are available if you would like more practice with these concepts.

Previous Citation(s)

Flowers, P., Neth, E. J., Robinson, W. R., Theopold, K., & Langley, R. (2019). Chemistry in Context. In Chemistry: Atoms First 2e. OpenStax. https://openstax.org/books/chemistry-atoms-first-2e/pages/12-introduction

This content is provided to you freely by EdTech Books.

Access it online or download it at https://edtechbooks.org/general_college_chemistry/entropy.