Integrated rate laws are mathematically derived from differential rate laws, and they describe the time dependence of reactant and product concentrations.
The half-life of a reaction is the time required to decrease the amount of a given reactant by one-half. A reaction’s half-life varies with rate constant and, for some reaction orders, reactant concentration. The half-life of a zero-order reaction decreases as the initial concentration of the reactant in the reaction decreases. The half-life of a first-order reaction is independent of concentration, and the half-life of a second-order reaction decreases as the concentration increases.
By the end of this section, you will be able to:
- Explain the form and function of an integrated rate law
- Perform integrated rate law calculations for zero-, first-, and second-order reactions
- Define half-life and carry out related calculations
- Identify the order of a reaction from concentration/time data
The rate laws discussed thus far relate the rate and the concentrations of reactants. We can also determine a second form of each rate law that relates the concentrations of reactants and time. These are called integrated rate laws. We can use an integrated rate law to determine the amount of reactant or product present after a period of time or to estimate the time required for a reaction to proceed to a certain extent. For example, an integrated rate law is used to determine the length of time a radioactive material must be stored for its radioactivity to decay to a safe level.
Using calculus, the differential rate law for a chemical reaction can be integrated with respect to time to give an equation that relates the amount of reactant or product present in a reaction mixture to the elapsed time of the reaction. This process can either be very straightforward or very complex, depending on the complexity of the differential rate law. For purposes of discussion, we will focus on the resulting integrated rate laws for first-, second-, and zero-order reactions.
8.0.1 First-Order Reactions
Integration of the rate law for a simple first-order reaction (rate = k[A]) results in an equation describing how the reactant concentration varies with time:
where [A]t is the concentration of A at any time t, [A]0 is the initial concentration of A, and k is the first-order rate constant.
For mathematical convenience, this equation may be rearranged to other formats, including direct and indirect proportionalities:
and a format showing a linear dependence of concentration in time:
The Integrated Rate Law for a First-Order ReactionThe rate constant for the first-order decomposition of cyclobutane, C4H8 at 500 °C is 9.2 10−3 s−1:
How long will it take for 80.0% of a sample of C4H8 to decompose?
SolutionSince the relative change in reactant concentration is provided, a convenient format for the integrated rate law is:
The initial concentration of C4H8, [A]0, is not provided, but the provision that 80.0% of the sample has decomposed is enough information to solve this problem. Let x be the initial concentration, in which case the concentration after 80.0% decomposition is 20.0% of x or 0.200x. Rearranging the rate law to isolate t and substituting the provided quantities yields:
Check Your LearningIodine-131 is a radioactive isotope that is used to diagnose and treat some forms of thyroid cancer. Iodine-131 decays to xenon-131 according to the equation:
The decay is first-order with a rate constant of 0.138 d−1. How many days will it take for 90% of the iodine−131 in a 0.500 M solution of this substance to decay to Xe-131?
In the next example exercise, a linear format for the integrated rate law will be convenient:
A plot of ln[A]t versus t for a first-order reaction is a straight line with a slope of −k and a y-intercept of ln[A]0. If a set of rate data are plotted in this fashion but do not result in a straight line, the reaction is not first order in A.
Graphical Determination of Reaction Order and Rate ConstantShow that the data in Figure 6.2 can be represented by a first-order rate law by graphing ln[H2O2] versus time. Determine the rate constant for the decomposition of H2O2 from these data.
SolutionThe data from Figure 6.2 are tabulated below, and a plot of ln[H2O2] is shown in Figure 8.1.
|Time (h)||[H2O2] (M)||ln[H2O2]|
A linear relationship between ln[H2O2] and time suggests the decomposition of hydrogen peroxide is a first-order reaction.
The plot of ln[H2O2] versus time is linear, indicating that the reaction may be described by a first-order rate law.
According to the linear format of the first-order integrated rate law, the rate constant is given by the negative of this plot’s slope.
The slope of this line may be derived from two values of ln[H2O2] at different values of t (one near each end of the line is preferable). For example, the value of ln[H2O2] when t is 0.00 h is 0.000; the value when t = 24.00 h is −2.772
Check Your LearningGraph the following data to determine whether the reaction is first order.
The plot of ln[A]t vs. t is not linear, indicating the reaction is not first order:
8.0.4 Second-Order Reactions
The equations that relate the concentrations of reactants and the rate constant of second-order reactions can be fairly complicated. To illustrate the point with minimal complexity, only the simplest second-order reactions will be described here, namely, those whose rates depend on the concentration of just one reactant. For these types of reactions, the differential rate law is written as:
For these second-order reactions, the integrated rate law is:
where the terms in the equation have their usual meanings as defined earlier.
The Integrated Rate Law for a Second-Order ReactionThe reaction of butadiene gas (C4H6) to yield C8H12 gas is described by the equation:
This “dimerization” reaction is second order with a rate constant equal to 5.76 10−2 L mol−1 min−1 under certain conditions. If the initial concentration of butadiene is 0.200 M, what is the concentration after 10.0 min?
SolutionFor a second-order reaction, the integrated rate law is written
We know three variables in this equation: [A]0 = 0.200 mol/L, k = 5.76 10−2 L/mol/min, and t = 10.0 min. Therefore, we can solve for [A], the fourth variable:
Therefore 0.179 mol/L of butadiene remain at the end of 10.0 min, compared to the 0.200 mol/L that was originally present.
Check Your LearningIf the initial concentration of butadiene is 0.0200 M, what is the concentration remaining after 20.0 min?
The integrated rate law for second-order reactions has the form of the equation of a straight line:
A plot of versus t for a second-order reaction is a straight line with a slope of k and a y-intercept of If the plot is not a straight line, then the reaction is not second order.
Graphical Determination of Reaction Order and Rate ConstantThe data below are for the same reaction described in Example 8.3. Prepare and compare two appropriate data plots to identify the reaction as being either first or second order. After identifying the reaction order, estimate a value for the rate constant.
|Time (s)||[C4H6] (M)|
In order to distinguish a first-order reaction from a second-order reaction, prepare a plot of ln[C4H6]t versus t and compare it to a plot of versus t. The values needed for these plots follow.
The plots are shown in Figure 8.2, which clearly shows the plot of ln[C4H6]t versus t is not linear, therefore the reaction is not first order. The plot of versus t is linear, indicating that the reaction is second order.
These two graphs show first- and second-order plots for the dimerization of C4H6. The linear trend in the second-order plot (right) indicates that the reaction follows second-order kinetics.
According to the second-order integrated rate law, the rate constant is equal to the slope of the versus t plot. Using the data for t = 0 s and t = 6200 s, the rate constant is estimated as follows:
Check Your LearningDo the following data fit a second-order rate law?
|Time (s)||[A] (M)|
Yes. The plot of vs. t is linear:
8.0.7 Zero-Order Reactions
For zero-order reactions, the differential rate law is:
A zero-order reaction thus exhibits a constant reaction rate, regardless of the concentration of its reactant(s). This may seem counterintuitive, since the reaction rate certainly can’t be finite when the reactant concentration is zero. For purposes of this introductory text, it will suffice to note that zero-order kinetics are observed for some reactions only under certain specific conditions. These same reactions exhibit different kinetic behaviors when the specific conditions aren’t met, and for this reason the more prudent term pseudo-zero-order is sometimes used.
The integrated rate law for a zero-order reaction is a linear function:
A plot of [A] versus t for a zero-order reaction is a straight line with a slope of −k and a y-intercept of [A]0. Figure 8.3 shows a plot of [NH3] versus t for the thermal decomposition of ammonia at the surface of two different heated solids. The decomposition reaction exhibits first-order behavior at a quartz (SiO2) surface, as suggested by the exponentially decaying plot of concentration versus time. On a tungsten surface, however, the plot is linear, indicating zero-order kinetics.
Graphical Determination of Zero-Order Rate ConstantUse the data plot in Figure 8.3 to graphically estimate the zero-order rate constant for ammonia decomposition at a tungsten surface.
SolutionThe integrated rate law for zero-order kinetics describes a linear plot of reactant concentration, [A]t, versus time, t, with a slope equal to the negative of the rate constant, −k. Following the mathematical approach of previous examples, the slope of the linear data plot (for decomposition on W) is estimated from the graph. Using the ammonia concentrations at t = 0 and t = 1000 s:
Check Your LearningThe zero-order plot in Figure 8.3 shows an initial ammonia concentration of 0.0028 mol L−1 decreasing linearly with time for 1000 s. Assuming no change in this zero-order behavior, at what time (min) will the concentration reach 0.0001 mol L−1?
The decomposition of NH3 on a tungsten (W) surface is a zero-order reaction, whereas on a quartz (SiO2) surface, the reaction is first order.
8.0.9 The Half-Life of a Reaction
The half-life of a reaction (t1/2) is the time required for one-half of a given amount of reactant to be consumed. In each succeeding half-life, half of the remaining concentration of the reactant is consumed. Using the decomposition of hydrogen peroxide (Figure 6.2) as an example, we find that during the first half-life (from 0.00 hours to 6.00 hours), the concentration of H2O2 decreases from 1.000 M to 0.500 M. During the second half-life (from 6.00 hours to 12.00 hours), it decreases from 0.500 M to 0.250 M; during the third half-life, it decreases from 0.250 M to 0.125 M. The concentration of H2O2 decreases by half during each successive period of 6.00 hours. The decomposition of hydrogen peroxide is a first-order reaction, and, as can be shown, the half-life of a first-order reaction is independent of the concentration of the reactant. However, half-lives of reactions with other orders depend on the concentrations of the reactants.
220.127.116.11 First-Order Reactions
An equation relating the half-life of a first-order reaction to its rate constant may be derived from the integrated rate law as follows:
Invoking the definition of half-life, symbolized requires that the concentration of A at this point is one-half its initial concentration:
Substituting these terms into the rearranged integrated rate law and simplifying yields the equation for half-life:
This equation describes an expected inverse relation between the half-life of the reaction and its rate constant, k. Faster reactions exhibit larger rate constants and correspondingly shorter half-lives. Slower reactions exhibit smaller rate constants and longer half-lives.
Calculation of a First-order Rate Constant using Half-LifeCalculate the rate constant for the first-order decomposition of hydrogen peroxide in water at 40 °C, using the data given in Figure 8.4.
The decomposition of H2O2 at 40 °C is illustrated. The intensity of the color symbolizes the concentration of H2O2 at the indicated times; H2O2 is actually colorless.
SolutionInspecting the concentration/time data in Figure 8.4 shows the half-life for the decomposition of H2O2 is 2.16 104 s:
Check Your LearningThe first-order radioactive decay of iodine-131 exhibits a rate constant of 0.138 d−1. What is the half-life for this decay?
18.104.22.168 Second-Order Reactions
Following the same approach as used for first-order reactions, an equation relating the half-life of a second-order reaction to its rate constant and initial concentration may be derived from its integrated rate law:
Restrict t to t1/2
define [A]t as one-half [A]0
and then substitute into the integrated rate law and simplify:
For a second-order reaction, is inversely proportional to the concentration of the reactant, and the half-life increases as the reaction proceeds because the concentration of reactant decreases. Unlike with first-order reactions, the rate constant of a second-order reaction cannot be calculated directly from the half-life unless the initial concentration is known.
As for other reaction orders, an equation for zero-order half-life may be derived from the integrated rate law:
Restricting the time and concentrations to those defined by half-life: and Substituting these terms into the zero-order integrated rate law yields:
As for all reaction orders, the half-life for a zero-order reaction is inversely proportional to its rate constant. However, the half-life of a zero-order reaction increases as the initial concentration increases.
Equations for both differential and integrated rate laws and the corresponding half-lives for zero-, first-, and second-order reactions are summarized in Table 8.1.
Summary of Rate Laws for Zero-, First-, and Second-Order Reactions
|rate law||rate = k||rate = k[A]||rate = k[A]2|
|units of rate constant||M s−1||s−1||M−1 s−1|
|integrated rate law|
|plot needed for linear fit of rate data||[A] vs. t||ln[A] vs. t|| vs. t|
|relationship between slope of linear plot and rate constant||k = −slope||k = −slope||k = slope|
Half-Life for Zero-Order and Second-Order ReactionsWhat is the half-life for the butadiene dimerization reaction described in Example 8.3?
SolutionThe reaction in question is second order, is initiated with a 0.200 mol L−1 reactant solution, and exhibits a rate constant of 0.0576 L mol−1 min−1. Substituting these quantities into the second-order half-life equation:
Check Your LearningWhat is the half-life (min) for the thermal decomposition of ammonia on tungsten (see Figure 8.3)?